Eurotech EDG-905IX Technické informace Strana 19

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 32
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 18
19
INSTALLATION
Important warnings
• Installation of the appliance into a kitchen worktop and its connection to the power
mains may only be performed by an adequately qualified technician.
• Veneer or other fi nish of the piece of kitchen furniture into which the hob is to be
built in should be treated with heat resistant glue (100°C); otherwise, the worktop
finish may be discolored or deformed.
• Cooking hob is dimensioned to be built into the worktop over a piece of kitchen
furniture, with a width of 600 mm or more.
• After installation, the front two fastening elements should be freely accessible from
below.
The kitchen furniture element underneath the hob should not be fitted with a
drawer. If the kitchen furniture element as a horizontal partition wall, it should be
installed no less than min 20mm from the lower surface of the worktop. The space
between the partition wall and the hob must be empty; no objects should be placed
into that gap.
• Hanging, or wall-mounted kitchen elements should be installed high enough not to
interfere with the work process.
• The distance between the cooking hob and the kitchen hood should be no less
than indicated in the instructions for kitchen hood installation. The minimum
distance is 700 mm.
• The distance between the appliance edge and the adjacent tall kitchen furniture
element should amount to no less than 150 mm.
• Use of massive wood decoration plates or boards on the worktops behind the
cooking hob is permitted, if the minimum distance remains the same as indicated in
the installation drawings.
• Minimum distance between the built-in cooking hob and the rear wall is indicated
on the installation drawing.
• Cooking hobs can be installed into worktops that are 25 to 40 mm thick.
The front part must have an opening of no less than 5 mm.
EDG-705IX
EDG-604IX
EDG-905IX
A
750mm
600mm
880mm
B
510mm
510mm
510mm
C
720mm
560mm
860mm
D
490mm
490mm
490mm
E
45mm
45mm
45mm
F
3mm
3mm
3mm
G
50mm
50mm
50mm
Zobrazit stránku 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Komentáře k této Příručce

Žádné komentáře